Technical guides, comparison articles and sourcing advice from senior industrial automation engineers.
Siemens Plc Battery Replacement. Siemens brand_guide for industrial automation. Learn best practices, specs, and sourcing.
Read Technical GuideComprehensive reference for the Allen-Bradley ControlLogix 1756 platform L73/L72/L83 processors, EN2T, CNB, ControlNet cards and power supplies.
Read Technical GuideTechnical reference for the CompactLogix 1769 series L33ER and L36ERM processors, IB16, OB16, IF8 I/O modules and compatible power supplies.
Read Technical GuideDeep guide to S7-300 and S7-400 CPU modules, signal modules (SM), communication processors (CP) and SITOP power supplies. Sourcing strategy included.
Read Technical GuideSide-by-side comparison of S7-1200 and S7-1500 performance, I/O, memory, networking, programming and ideal use cases for each platform.
Read Technical GuideTechnical guide to Modicon Quantum (140 series) and M340 CPS power supplies, CRA remote I/O, processors, and migration tips for aging installations.
Read Technical GuideReference for GE Fanuc RX3i (IC695) and Series 90-30 (IC693) CPUs, power supplies, I/O modules, communication cards and end-of-life sourcing.
Read Technical GuideDeep dive into the SLC 500 1747-L531 processor memory architecture, I/O capacity, RSLogix 500 compatibility and replacement strategy for legacy plants.
Read Technical GuideTechnical guide to Omron CJ2M and Sysmac NJ series CPUs, I/O cards, EtherNet/IP modules, and CX-Programmer / Sysmac Studio compatibility.
Read Technical GuideComplete reference for MicroLogix 1100 and 1400 analog I/O expansion modules, LCD display, EtherNet/IP port, and end-of-life replacement strategy.
Read Technical GuideTechnical guide for Allen-Bradley PLC-5 end-of-life available spare parts, 1771 I/O sourcing, and migration paths to ControlLogix 1756 with minimal downtime.
Read Technical GuideTechnical guide for Allen-Bradley PowerFlex 40 and 755 VFDs drive modules, HIM panels, brake resistors, common fault codes and replacement strategy.
Read Technical GuideComplete guide to Siemens ET200S and ET200SP distributed I/O power modules, digital/analog I/O, motor starters, PROFIBUS and PROFINET head modules.
Read Technical GuideTechnical reference for Siemens SINAMICS S120 and G120 drives control units, motor modules, line modules, power modules and CU310-2 DP/PN compatibility.
Read Technical GuideDeep dive into Siemens CP343-1 and CP443-1 communication modules EtherNet/IP, PROFIBUS, Modbus TCP configuration, compatible S7-300/400 racks and firmware.
Read Technical GuideTechnical guide for Schneider Electric Modicon M580 and Premium PACs BMX and TSX processors, power supplies, I/O modules and EcoStruxure compatibility.
Read Technical GuideTechnical deep dive into Modicon Quantum 140 CPUs 140CPU65150, 140CPU65160, CPS power modules, hot standby configuration and end-of-life sourcing.
Read Technical GuideComplete reference for GE Fanuc IC693 Series 90-30 CPU350/364/374, power supplies, analog and discrete I/O modules and Proficy Machine Edition compatibility.
Read Technical GuideTechnical guide for Mitsubishi MELSEC Q and FX series PLCs Q06UDEH CPUs, QX/QY I/O modules, FX3U/FX5U modules, power supplies and GX Works compatibility.
Read Technical GuideTechnical reference for Yaskawa Sigma-5 and Sigma-7 servo drives SGD7S amplifiers, SGMGV motors, MECHATROLINK-III, common alarms and replacement strategy.
Read Technical GuideComplete guide to ABB AC500 PLCs PM573/PM591/PM595 CPUs, DI/DO/AI/AO modules, CM579 PROFIBUS cards, and Automation Builder software compatibility.
Read Technical GuidePractical migration guide from Allen-Bradley SLC 500 to CompactLogix 5370/5380 I/O mapping, program conversion in RSLogix 500 to Studio 5000, wiring changes and testing.
Read Technical GuideField engineer's guide to PROFIBUS DP troubleshooting termination resistance, GSD files, DP/PA coupler faults, Siemens S7 diagnostics and ProfiTrace use.
Read Technical GuideSide-by-side comparison of EtherNet/IP and PROFINET topology, cycle time, conformance classes, controller compatibility and migration considerations.
Read Technical GuideEngineering guide to building a PLC spare parts inventory criticality analysis, EOL risk assessment, stocking levels by platform, and eBay sourcing best practices.
Read Technical GuideStep-by-step migration guide from Siemens S7-300 to S7-1500 in TIA Portal hardware mapping, SCL/LAD conversion, PROFIBUS to PROFINET, and factory acceptance testing.
Read Technical GuideTechnical guide for Omron NX1P2, NX102, and NJ501 controllers I/O units, EtherCAT slave modules, safety units and Sysmac Studio compatibility.
Read Technical GuideComplete reference for Allen-Bradley GuardLogix 5570 and 5580 safety PLCs 1756-L7xS/L8xES controllers, safety I/O modules, SIL 2/3 compliance, and Studio 5000 Safety configuration.
Read Technical GuideTechnical guide for Allen-Bradley PanelView Plus 6 and 7 HMIs display assemblies, touch screens, power supplies, 2711P part numbers and FactoryTalk View ME compatibility.
Read Technical GuideTechnical reference for Allen-Bradley PowerFlex 525 AC drives 25B part numbers, EtherNet/IP adapter, brake modules, common fault codes F012/F602 and replacement strategy.
Read Technical GuideComplete guide to Beckhoff CX Embedded PCs and BK Bus Couplers CX9020, CX5120, BK9050 EtherCAT couplers, KL/EL I/O terminals and TwinCAT 3 compatibility.
Read Technical GuideTechnical guide for Siemens SIMATIC S5 legacy PLCs S5-115U, S5-135U, S5-155U, 6ES5 module sourcing, memory card formats, and migration path to S7-1500 via TIA Portal.
Read Technical GuideComplete reference for Siemens SITOP PSU300M, PSU200M, and SMART100 power supplies input/output specs, 6EP part numbers, redundancy modules and troubleshooting tips.
Read Technical GuideTechnical guide for Schneider Electric Altivar 312 and Altivar 71 VFDs ATV part numbers, control cards, brake resistors, common fault codes OLF/PHF and replacement strategy.
Read Technical GuideField guide to DeviceNet troubleshooting network power supply, MAC ID conflicts, EDS file installation, Allen-Bradley 1756-DNB scanner faults and RSNetWorx diagnostics.
Read Technical GuideTechnical reference for FANUC CNC Series 30i and 31i A02B/A06B control units, servo amplifier modules, MDI units, spindle drives and end-of-life sourcing.
Read Technical GuideStep-by-step PLC battery replacement guide for Allen-Bradley 1756-BA2, Siemens 6ES7 lithium batteries, GE Fanuc IC693ACC301 battery life, low battery alarms and safe swap procedure.
Read Technical GuideTechnical guide to the Omron CJ1 platform CJ1M and CJ1G/H CPUs, CJ1W digital and analog I/O units (ID211, OC211, MAD42), power supplies and CX-Programmer compatibility.
Read Technical GuideComplete reference for SLC 500 chassis and power supplies 1746-A4/A7/A13 racks, 1746-P1/P2/P4 power modules, current budgeting and replacement strategy for legacy systems.
Read Technical GuideSide-by-side comparison of SLC 500 processors 1747-L531, L541, L551 and L553 (SLC 5/03, 5/04, 5/05). Memory, I/O capacity, comms ports and which to choose as a drop-in replacement.
Read Technical GuideTechnical guide to the MicroLogix 1500 1764-28BXB base units, 1764-LSP/LRP processors, expansion I/O, RSLogix 500 compatibility and end-of-life sourcing.
Read Technical GuideSelection and replacement guide for Allen-Bradley 1606 DIN-rail power supplies 1606-XLE and 1606-XLS series (XLE240E, XLS480E), output ratings, redundancy and sizing for control panels.
Read Technical GuideDeep dive into Schneider Modicon Premium TSX P57 processors (P57 4634M and variants), TSXPSY power supplies (TSXPSY1610), TSX I/O modules and migration path to M580.
Read Technical GuideReference for Allen-Bradley POINT I/O 1734 EtherNet/IP and DeviceNet adapters (1734-AENT, 1734-EPAC), digital/analog I/O modules, terminal bases and ArmorPoint compatibility.
Read Technical Guide